Ultrasonic Transducer

Ultrasonic Generator

Piezo Ceramic

Ultrasonic Cleaner

Ultrasonic Welder

Mould electrolysis ultrasonic cleaner

Mould electrolysis ultrasonic cleaner
Mould electrolysis ultrasonic cleaner
, combined with the alkaline mould electrolytic cleaning liquid, can quickly and effectively remove the residue of the gas and oxidation layer inside the mold surface and the mold hole, and restore the finish of the mold. 
Working principle: The electrolysis cleaning system emits gas to the metal surface, and acts together with the electrolyte to loosen the dirt. Through the vibration of the ultrasonic wave, the dirt peels off and floats, the metal is attached to the cathode, and the effect of washing with the sauna removes gas residue and P0M glue, Residue of color powder, toner residues, high-temperature sulfides, grease, carbon deposits, rust stains, rust blocks and other mold contaminants, even if the dirt inside the dead corner can be removed by the electrolytic cathode.


Advantages of mould electrolysis ultrasonic cleaner:
1. Restore the metal to its original bright color.
2.Even complex shapes can remove dirt.
3.Can achieve the purpose of clean decontamination.
4. Good effect of rust cleaning and rust prevention.
5.Generally speaking, it saves about one hour or more than manual cleaning.
6.Can greatly reduce the poor rate after washing.


 
Mould electrolysis ultrasonic cleaner
Mould electrolysis ultrasonic cleanerMould electrolysis ultrasonic cleaner

Mould electrolysis ultrasonic cleaner

You can leave a message and get our technical support and quotation reply,You can fill in the exact information in the below form .

Online ordering

Title Name
Email Tel
Message

More productMore product>>